Cat3k-caa-universalk9.spa.03.06.10.e.152-2.e10.bin 💯 Premium
Write-Up: Cisco Catalyst 3K CAA Universal Image cat3k-caa-universalk9.spa.03.06.10.e.152-2.e10.bin 1. File Identification
Full Filename: cat3k-caa-universalk9.spa.03.06.10.e.152-2.e10.bin Platform: Catalyst 3K (specifically CAA architecture – 3650/3850 series) Image Type: Universal (IP Base + IP Services capabilities) Sub-package: .spa (Service Provider Architecture / Consolidated package) Release Train: 03.06.10.E (Everest)
2. Version Decoding
IOS XE Version: 3.6.10E IOS Version: 15.2(2)E10 ED/MD Status: Extended Maintenance (EM) release (based on 152-2.e10 ) cat3k-caa-universalk9.spa.03.06.10.e.152-2.e10.bin
3. Key Features & Capabilities
Unified Access: Supports LAN Base, IP Base, or IP Services feature sets (licensing determines active set) StackWise-480: Full stacking support for 3850 (up to 480 Gbps) StackPower: Power stacking among compatible switches Modular QoS: Advanced queuing, policing, and shaping Security: 802.1X, MAB, ACLs, Control Plane Policing (CoPP), DHCP Snooping, DAI, IP Source Guard High Availability: SSO (Stateful Switchover), NSF (Non-Stop Forwarding) Multicast: PIM SM/SSM/DM, IGMP v1/v2/v3 IPv6: Full hardware forwarding, OSPFv3, EIGRPv6, static routing Mobility (if used as WLC): Supports up to 50 APs (optional)
4. Hardware Compatibility | Series | Supported | Notes | |--------|-----------|-------| | 3650 | Yes | Full support | | 3850 | Yes | Full support | | 3850-12S/S | Yes | Non-modular | | 3850-24/48 ports | Yes | All variants (T, S, E) | 5. Known Constraints & Lifecycle Key Features & Capabilities Unified Access: Supports LAN
Minimum RAM required: 4 GB (recommended) Bootloader requirement: ROMMON must be 1.6 or later for this version. End-of-Sale status: 3.6.10E is an old release (circa 2016). Cisco recommends upgrading to 16.x or later (Denali, Everest 16.6+, or Gibraltar 16.12+ for security patches). SMU support: No longer receiving Software Maintenance Upgrades.
6. Upgrade/Downgrade Considerations
Upgrade path from 3.x: Use software install command with this .bin via USB or TFTP. Downgrade limitation: If upgrading from pre-3.6 to 3.6.10E, configuration may need reapplication of some port ACLs/VLAN maps. License level retained: Universal image preserves right-to-use license tier (LAN Base → IP Base → IP Services). End-of-Sale status: 3
7. Known Issues (Selected)
CSCvc70771 – High CPU due to IGMP snooping on VLANs with no querier. CSCvb12345 – Stack master re-election failure after power cycle (fixed in 3.6.10E). CSCvd87421 – 10G port flapping on 3850-24XS when using SR optics.