If you're unsure about performing the update or encounter any issues, contacting Satlink's customer support or a professional technician for assistance is recommended.
Select the correct COM Port identified in the Device Manager. satlink ws 6933 software update work
| Problem | Likely Cause | Fix | | :--- | :--- | :--- | | | Wrong cable (charge-only) or driver not installed. | Use a known data USB cable. Reinstall PL2303 driver. | | Upgrade tool hangs at 0% | COM port conflict or wrong baud rate. | Force the COM port to 115200 baud in Device Manager. Reboot PC. | | “File mismatch” error | Firmware is for a different hardware revision. | Open the battery cover. Read H/W version. Find matching firmware. | | Screen stays black after update | Bootloader corrupted or incomplete write. | Repeat the update using Method B (force boot mode). | | Satellite list is still old | The update didn’t write the transponder table. | Factory reset: Menu → System → Factory Default → OK. Then re-scan. | If you're unsure about performing the update or
: Once the update is complete, close the program, disconnect the USB cable, and restart the meter. Navigate to the System Setup menu to verify that the software version has been updated. Benefits of Updating Satlink Ws 6933 Manual - sciphilconf.berkeley.edu | Use a known data USB cable